Photon 160, Photon 320 or Photon 640. This Board works on the Flir Tau / Tau 2 (with 2,4X zoom) or other Flir Thermal Camera with Photon Replicator Board.
This sale is for the Control Board Only (or with switches) All else shown here is for visual purposes only. We have also designed EXTERNAL shutter for the photon series cameras if your shutter is broken. You will need the 50 pin HIROSE connector, or access to RS232, ground and Power. The Flir Camera control GUI is available online, but with our board, No PC required to control the following functions. Non Uniformity Correction - Manual Shutter.
The simple board level design has flying leads and you will need to do all soldering/connections to Thermal Camera, Power, Video and pushbuttons. Wired version requires only connections to camera, power and video. THIS controller does not affect the framerate of the Thermal Camera, it will work on all variations, 9Hz, 30 or 60Hz TIC's. Please note: incorrect attachment during hookup can damage this or other devices. We are not there to assure correct wiring.Please specify if this is for Tau/Tau2 or Photon Thermal Cameras when ordering for proper firmware. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Cameras & Imaging\Infrared & Thermal Imaging".
The seller is "surplusstufffs" and is located in this country: US. This item can be shipped worldwide.