We have also designed EXTERNAL shutter for the photon series cameras if your shutter is broken. These are the TIC (thermal imaging cameras) that are in the MSA Evolution 4000, 5000, 5200 and 5200X2 series Firefighting cameras. Additionally, I can supply with either 10 pin MSA or 30 Pin SAMTEC I/O connector.There's a higher charge for connectors. The Flir Camera control GUI is available online, but with our board, No PC required to control the following functions.
Non Uniformity Correction - Manual Shutter. The simple board level design has flying leads and you will need to do all soldering/connections to Thermal Camera, Power, Video and pushbuttons. Wired version requires only connections to camera, power and video. THIS controller does not affect the framerate of the Thermal Camera, it will work on all variations, 9Hz, 30 or 60Hz TIC's.Please note: incorrect attachment during hookup can damage this or other devices. We are not there to assure correct wiring. Please specify if this is for Photon or Tau/Tau2 Thermal Cameras when ordering for proper firmware. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Cameras & Imaging\Infrared & Thermal Imaging". The seller is "surplusstufffs" and is located in this country: US. This item can be shipped worldwide.